Front End Brake Work
01-02-2009, 07:01 AM
Post: #1
Front End Brake Work
Took my AE86 too a local mechanic, they told me it would be $800 to do the work. I figured I might as well do it myself as I could get the parts for around $200.

Needs:
Calipers
Pads
Rotors

I've never done this before, can you guys give me help on what I should do.

Thanks
Find all posts by this user
01-02-2009, 08:45 AM
Post: #2
Front End Brake Work
88rotors.com for the disks & pads, take off you calipers & get them re-conditioned, kits are available from Toyota if you fancy a go, but Id leave it to someone with experience if you are a novice.

An 86 is for Life, not just for Christmas
Find all posts by this user
01-02-2009, 05:42 PM
Post: #3
Front End Brake Work
Re-Conditioned?

I was talking with a parts store earlier and they said they could give me 2 Calipers for $90. However the garage I went to said they were going to re-condition the ones I had for $80 a peice.

Somehow the diference in price doesnt sound right to me.

Any Ideas?
Find all posts by this user
01-02-2009, 05:51 PM
Post: #4
Front End Brake Work
For $90 see what happens, hard to figure that price out.
Go get em & report back

An 86 is for Life, not just for Christmas
Find all posts by this user
01-02-2009, 06:01 PM
Post: #5
Front End Brake Work
What kind of Tools do you need to change the parts to begin with?

I would assume a Socket set but a friend mentioned some cars require a special socket, is this the case with the AE86.
Find all posts by this user
01-02-2009, 06:57 PM
Post: #6
Front End Brake Work
Socket set & spanners, G Clamp to replace the pads when you get the Calipers sorted.

An 86 is for Life, not just for Christmas
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  20v mains & big end bearing izanagi 9 9,288 12-26-2016 12:42 PM
Last Post: pack
  Front big brake kit DidiDex 14 17,340 10-24-2016 09:29 AM
Last Post: FanIsHere
  How seatbelt rails work? FanIsHere 2 4,222 05-18-2016 09:52 AM
Last Post: Bean
  S13 rear end project underway 4000GT 23 25,601 07-26-2013 09:54 AM
Last Post: 4000GT
  Gear end , drive pinion height filh 5 10,339 06-27-2013 12:29 AM
Last Post: filh

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication