Door length
03-18-2014, 10:05 AM
Post: #1
Door length
Can anybody tell me how long an ae86 door is (preferably in cm's)?
If anyone can take a tape measure and check the length at the bottom and perhaps 20 cm's higher I would be most grateful.
I need to buy some sheetmetal do create some lower door skins for my project, and would like to avoid having to create a skin out of multiple pieces

I can't transport 2 by 1 meter sheets of metal in my little daily driver, so I usually have them cut in half, but I expect the door is longer than 1 meter so I need to know. Think I might also have them bend a lip on two panels for me since my bending brake is only 80cm's wide.

FABRICA MI DIEM, PVNC!
Visit this user's website Find all posts by this user
03-18-2014, 11:18 AM
Post: #2
Door length
Hi Ivan,
just measured for you.

The bottom: (has curves at either end) between 1257mm and 1265mm

200mm up: 1325mm

Widest part I could find (along the indented trim line) measured at 1337mm

If you need anymore just ask.

hth

An analogue brain in a digital World
Find all posts by this user
03-18-2014, 02:11 PM
Post: #3
Door length
That's all the info I need.. thanks a lot totta!

FABRICA MI DIEM, PVNC!
Visit this user's website Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  4AGE 20v Ignition Lead Length mad.matt 3 6,094 10-01-2014 03:43 PM
Last Post: mad.matt
  ae86 crush sleeve length choyr 15 19,122 02-26-2014 05:03 PM
Last Post: choyr
  Length of factory cat Rick 4 7,099 08-07-2013 06:03 AM
Last Post: jondee86
  Valve springs length Vil 4 5,430 04-04-2013 07:41 PM
Last Post: oldeskewltoy
  Ae86 accel cable length? stalker 1 3,327 07-30-2011 12:44 PM
Last Post: stalker

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication