20v mains & big end bearing
12-22-2016, 12:50 AM
Post: #1
20v mains & big end bearing
Hi everyone,
I'm replacing the mains & big end bearings according to the FMS. I did the sum with the 5 digits and it gets me the number: 22233 for the mains bearings.
As I guess, one digit is the size for one journal.
My question is: where goes my first size (2)? The front (oil pump side) or the rear (rear oil seal side) ?
Same question with the 4 digits for the big ends bearings (1222). Does it start at the first cylinder (front of the engine) or the rear ?

Thanks for your help.
Find all posts by this user
12-22-2016, 08:45 AM
Post: #2
20v mains & big end bearing
lesson i learned dont go with the numbers but measure!!
Find all posts by this user
12-22-2016, 01:23 PM
Post: #3
20v mains & big end bearing
izanagi, like ditn said.... Don't go for the numbers. They're OK for reference but measure carefully each one.

You have two options here.

If your engine is still STD you can buy some King Bearings std ones, and by wear they will match the measurements.

OR

If your engine is still STD you can go for the numbers (with measurement taken carefully)

regards
Find all posts by this user
12-22-2016, 03:42 PM
Post: #4
20v mains & big end bearing
(12-22-2016 01:23 PM)pack Wrote:  izanagi, like ditn said.... Don't go for the numbers. They're OK for reference but measure carefully each one.

You have two options here.

If your engine is still STD you can buy some King Bearings std ones, and by wear they will match the measurements.

OR

If your engine is still STD you can go for the numbers (with measurement taken carefully)

regards
I wanted to go for ACL bearings. What do you think ?
Find all posts by this user
12-22-2016, 05:00 PM
Post: #5
20v mains & big end bearing
Actually, the ACL bearings madness is almost gone... And King Bearings are being used all over with nice results.

I've bought a few for 4AGE's and B16/B18 with sweet results...

Keep in mind that the bearing set from ACL/KING STD will not match any numbers you have. They are all the same size, and they work by wear.

When you fit them, they will gradually wear and match their clearance.
Find all posts by this user
12-22-2016, 10:49 PM
Post: #6
20v mains & big end bearing
King Bearings seams to be cheaper also
Find all posts by this user
12-23-2016, 11:40 AM
Post: #7
20v mains & big end bearing
And they're pretty good...... Wink
Find all posts by this user
12-24-2016, 11:26 PM
Post: #8
20v mains & big end bearing
If you are using the OEM sizing... the numbers begin at the front of the block......

Dan -

You can |Sad .... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991
Find all posts by this user
12-25-2016, 11:38 AM
Post: #9
20v mains & big end bearing
I've used several King bearings and all of them died in about 1000kms, I really don't get how people having good reliability with them. Or everyone uses the King Racing series? The normal ones I don't suggest, the racing series I never tried.
I had good results with Toyota originals, ACL Race, and NDC (sold in europe under Kolbenschmidt name) also the Taiho is a good japanese brand, I think the Toyota oem ones are also Taiho's. They are sold as Glyco in Europe.
Find all posts by this user
12-26-2016, 12:42 PM
Post: #10
20v mains & big end bearing
When i talk about King bearings yeah they are King Racing series!
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Big wheel problems gh0st 16 6,529 11-15-2021 10:51 PM
Last Post: gh0st
  Front big brake kit DidiDex 14 17,212 10-24-2016 09:29 AM
Last Post: FanIsHere
  Wheel Bearing Temperature Super86 5 6,052 09-29-2014 12:26 AM
Last Post: jondee86
  Machining Pistons to run 20v head... And FCR's on a 20v? PazzaAE86 2 4,729 09-15-2013 01:08 AM
Last Post: jondee86
  S13 rear end project underway 4000GT 23 25,397 07-26-2013 09:54 AM
Last Post: 4000GT

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication