Ae86 bulk head mod to fit hydrolic clutch?
11-24-2014, 04:06 AM
Post: #1
Ae86 bulk head mod to fit hydrolic clutch?
I was lucky enough to snag an '86 GTS shell with all of the parts and rebuild engine for $1500. I am going to swap all of the parts to my 85 sr5.

As I look at different write ups for swaps I find more and more little tidbits the last write uo did not. I just cam across a thread that said to put in the hydrolic clutch from the GTS I will need to make a Modification to the bulk head.

I have googled my fingers off and couldnt find an explination of what this modification is.

Any help with explaining this would be much appreciated

Thanks,
Frank
Find all posts by this user
11-24-2014, 10:00 AM
Post: #2
Ae86 bulk head mod to fit hydrolic clutch?
Probably nothing more than drilling a few correctly positioned holes.

FABRICA MI DIEM, PVNC!
Visit this user's website Find all posts by this user
11-24-2014, 10:08 AM
Post: #3
Ae86 bulk head mod to fit hydrolic clutch?
Thats what im hoping for. Once I strip the shell and my car I will look around for differences.
Find all posts by this user
11-24-2014, 04:06 PM
Post: #4
Ae86 bulk head mod to fit hydrolic clutch?
the only thing i can guess is that in case of a 3A engine, there might be a cable operated clutch instead of a hydraulic, it could be that, but i'm not sure if the american SR5s got a cable clutch box. If it is, it might be interesting for KP61s and other k-powered cars, as it's the same box, but with a 4A bellhousing.

"It's all about the heart, the people who focus on parts, turbo's and all that stuff...they're just losers."
-Shinji Minowa
Find all posts by this user
11-24-2014, 08:42 PM
Post: #5
Ae86 bulk head mod to fit hydrolic clutch?
I just replaced my clutch master and slave cylinder dont those only exist on a hydrolic clutch? Im not sure if I have ever worked on a car without one. But that is what the mod is for; going from a cable clutch to a hydrolic one
Find all posts by this user
11-24-2014, 10:23 PM
Post: #6
Ae86 bulk head mod to fit hydrolic clutch?
yes, if you've changed the master and slave, there's nothing else you need to change, because you allready have the right gearbox/hydraulics in the car atm.

So the bulkhead thing is probably for a cable clutch operated car, which aren't very common outside of Japan anyway.

"It's all about the heart, the people who focus on parts, turbo's and all that stuff...they're just losers."
-Shinji Minowa
Find all posts by this user
11-25-2014, 04:01 AM
Post: #7
Ae86 bulk head mod to fit hydrolic clutch?
Awesome! Thanks for the confirmation!
Find all posts by this user
11-25-2014, 07:25 PM
Post: #8
Ae86 bulk head mod to fit hydrolic clutch?
maybe not.........


The SR5 hydraulics are mounted on the left side, because the single cam 4AC's exhaust goes down the right side. This means you need to find a hydraulic line to fit to the bell on the other side now.

Dan -

You can |Sad .... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991
Find all posts by this user
11-25-2014, 09:21 PM
Post: #9
Ae86 bulk head mod to fit hydrolic clutch?
Do you think that could be as simple as getting a longer clutch line?
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Mistlamps don't fit gh0st 1 1,878 10-14-2021 09:00 PM
Last Post: banpei
  Can you identify this wheels? Will they fit AE86? Ryo 8 9,525 09-08-2021 12:48 PM
Last Post: Ryo
  Q, BMW E30/E36 front struts for a fit? Allexz 7 7,858 03-18-2013 11:18 AM
Last Post: Lajoosh
  Interesting 20v cam cover mod banpei 3 8,335 05-31-2012 02:44 PM
Last Post: Kid Karola
  Exedy 'S New Metal' Racing Clutch Kit Toyota 4AGE AE86, dsrturbo 2 5,402 07-28-2011 10:51 AM
Last Post: Bean

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication