AE86 weights list
03-25-2013, 08:26 PM
Post: #1
AE86 weights list
Righto,
Everyone knows that less weight in an AE86 is better. It's the welterweight punching above its weight right? But what exactly can you do about it and perhaps more importantly, what can't you do?

When we go online and start looking we find lots of posts that suggest that a couple FRP panels and we're at 850kg's. Some people claim that low 700kgs are possible with a full cage and serious cutting of sheetmetal. Lets try and see if we as a community can try and get an idea of how serious we can take these claims.

Over the years I've weighed some stuff as it went through my hands. Mostly suspension stuff for my models, but some other stuff too. Logic dictates that when we add up most of the important stuff we end up with the weight of the final car.

What I'm going to do is post some tables with parts, weights and where applicable weight saved. Hope you guys will chime in with some measurements you made yourselves. I will update them on a regular basis.

A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user
03-25-2013, 08:27 PM
Post: #2
AE86 weights list
Rear Suspensionkg%Source
diff and pumpkin
18.6
18
me
axle housing
15.9
16
me
axles
11.5
11
me
rear bilstein
1.7
2
me
spring (each)
1.3
1
me
rear caliper
3.1
3
me
rear disc
4.2
4
me
Linkages
4
4
me
backing plate
0.4
0
me
swaybars (F&R)
4.5
4
me
konig Rewind
6.7
7
me
Toyo T1R
9.1
9
me
Axle_total
107.3



A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user
03-25-2013, 08:27 PM
Post: #3
AE86 weights list
Front Suspensionkg%source
konig Rewind
6.7
19
me
Toyo T1R
9.1
26
me
spring (each)
1.3
4
me
koni front insert
2.2
6
me
RCA
0.2
1
me
Stock front caliper
3
9
me
Dynalite caliper
1.1
3
me
front disc
4.2
12
me
Corrado disk
5.3
15
me
Strut housing
9.1
26
me
Wheel total OEM
35.7
Wheel total Wilwood
34.9



A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user
03-25-2013, 08:27 PM
Post: #4
AE86 weights list
Chassis -OEM panelskg%source
Hood - OEM
14
google
door - OEM
21.2
google
Hatch
14.2
google
Fenders- frt
2
estimate
Fenders - rear
2
estimate
Bumper frt
13
Bumper rear
16.5
Roof
5
estimate
Unibody
?
dunno
Panels total (so far)
113.1




Chassis FRP panelskgsavessource
Hood
4.7
9.3
XTR
Door
5.5
15.7
XTR
Hatch
7.5
6.7
XTR
Bumper frt
5
8
XTR
Bumper rear
4
12.5
XTR
Fenders frt
1.5
0.5
XTR
Fender rear
1.5
0.5
XTR
rear panel
1.6
?
XTR
Roof
3
?
XTR
Totals
42.8
69.9


Glass..mostly google and estimates (close though)

Chassis - OEM glass
Door
3.8
1.9
side windows
4.4
2.2
hatch
7.6
3.8
Total
24
12

Chassis - glass Polykgsaves
Door
1.9
1.9
side windows
2.2
2.2
hatch
3.8
3.8
Total
12
12


According to my homologation papers
FIA basic rollcage 48kg

A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user
03-25-2013, 08:28 PM
Post: #5
AE86 weights list
Engine systems and drivetrainkg
4AGE
131
T50 gearbox
29
driveshaft -OEM
10
radiator
4
water
6
fuel tank
13
fuel (1/2 tank)
20
total
213

Could gain a lot by data on lightened flywheels, and data on weights of OEM engine parts (alternator, std plenum/manifold, 20V ITBs, exhaust mani)

Alternativeskgadds
1UZFE
220
89
W50 gearbox
34
5
F20C inc manifolds dry
148
17
F20C gearbox stock ( = AISIN az6 variant?)
51
22
CA18DET+gearbox
220
60

F20C can get down to 185kg with money thrown at lightweight parts, but difficult to do with that heavy transmission.
1UZFE weight taken from a picture of an actual 1UZFE hanging from a scale. Idiots without proof of lower weight do not have to apply, yes they are that heavy, no they are not made of fairy dust.

4AGE flywheel weights, mostly from Google (thanks Denso)
Flywheelskgsaved
Stock
8.6
0
Exedy
4.9
3.7
XTR
4.5
4.1
XTD
4.1
4.5
F1 racing
4.5
4.1
Fidanza
3.7
4.9
Toda
3.7
4.9
TRD
5
3.6
max

4.9

Almost 5kg to gain!

A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user
03-25-2013, 08:28 PM
Post: #6
AE86 weights list
List of parts for kind members to fill in and expand (just quote and add):

Body
rear lights
spare tire
original seats
original rear seat
steering wheel
OEM battery
Engine wiring loom+ECU
Body Wiring loom
Levin headlights
Trueno headlight mechanism
Dashboard
Gauge unit
pedal box
HVAC unit

Front suspension
Front cross member
Front Lower Control arm
Tension rods
Tie rods
Steering column
Steering rack
brake booster
brake master cylinde

Engine
ITBs
Header (OEM, TRD etc)
alternator
Airfilter
etc
clutch master cylinder

Lots of parts still to do, many kg's to add. Do your bit for the community! Big Grin

A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user
03-25-2013, 08:28 PM
Post: #7
AE86 weights list
[reserved]

A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user
03-25-2013, 10:45 PM
Post: #8
AE86 weights list
Why the reservations? You can edit your first post any time you like Dumb question

Bit odd to calculate the weight of the rear fenders... they're part of the unibody.

FABRICA MI DIEM, PVNC!
Visit this user's website Find all posts by this user
03-25-2013, 11:50 PM
Post: #9
AE86 weights list
Thanks for posting these weights, it really shows not only what
is possible but also that the work and cost is worth it.
Getting on for 100kg saved overall including interior parts and
underseal etc ?

An analogue brain in a digital World
Find all posts by this user
03-25-2013, 11:56 PM
Post: #10
AE86 weights list
i can measure some parts for you tomorrow Smile

front seats,back seats,hood,door,fenders front,...
I remember the front seats weights a whooping 22kg+- a piece :o
Spare wheel is arround 16.8 kilo ....
the tar on the inside of the car weights arround 20,5 kg.
I dont remember the sunroof weight but it is more than 5 kilo i think.

more tomorrow
Find all posts by this user


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication