AE86 booter
08-03-2020, 11:33 PM
Post: #21
AE86 booter
(08-03-2020 09:23 PM)banpei Wrote:  
(08-02-2020 02:09 PM)Mylesmck Wrote:  I had already measured the diagonals across the two door openings and found they were out by roughly a centimeter
You mean the roofline is skewed to one end?
Possibly, requires more investigation, but with the door is on there is a slight perceptable step up when I run my hand over where the top of the door meets the roof near the screen (if that makes any sense lol). It could have something to do with the hole in the floor and the outrigger... My theory is that if the a-pillar moves rearwards where it meets the bulkhead, it will cause the top of it to rise

Sent from my ANE-LX1 using Tapatalk
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  My 20v booter project diggerdolan 2 3,064 10-01-2012 04:45 PM
Last Post: zenki

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication