How it's made the front bumper bracket?

[Mattolo]

Hi, I need to know how it's made the bracket of the front bumper to remake myself or to adapt from other cars.

Here the photo of the right side:


thank you very much!

[Ivan141]

I made some front bumper brackets myself for a trueno a few months ago.
Basically all I did was weld a square of rectangular hollow iron bars to fit to the bumper skin, and weld that to some old US bumper mounts where I removed the front end.

You could build that bit yourself though, it's just something that sits on top of the chassisbars with a hole in it to put the bolt through.

Havent got photo's of it though...

[Mattolo]

Ivan141 Wrote:I made some front bumper brackets myself for a trueno a few months ago.
Basically all I did was weld a square of rectangular hollow iron bars to fit to the bumper skin, and weld that to some old US bumper mounts where I removed the front end.

You could build that bit yourself though, it's just something that sits on top of the chassisbars with a hole in it to put the bolt through.

Havent got photo's of it though...

thank you very much.
I'll unmount the front bumper, but just to have a idea how it's made the bracket that I need.
Someone have some photos?
I forgot to tell that the car it's a levin model, in other words it' the same of european version.