4age 20v and 16v engine mounts the same?
05-09-2007, 12:22 PM
Post: #1
4age 20v and 16v engine mounts the same?
upon installing the 4age in ae86 would you have to fabricate motor mounts or would you bea able to use the motor mounts that are allready there???
Visit this user's website Find all posts by this user
05-09-2007, 01:18 PM
Post: #2
4age 20v and 16v engine mounts the same?
Please make the topic titles relevant. "4age 20v" might sound relevant for you, but if we have 40 topics with all the same title like "4age 20v" no one can actually find a specific topic either in the search or in the forum overview. "4age 20v and 16v engine mounts the same?" would suit this topic title much better. So I took the liberty to change it now. Wink

About your question:
You asked about the same question earlier:
http://www.aeu86.org/viewtopic/4age-20v-...sr5/t/4996

If you would have read the technical FAQ you would have known you can just re-use the engine mounts because the A-series have the same mounting points. Just have a look over there and most of your questions will be answered already. Wink

You can find the engine specific FAQ here:
http://www.aeu86.org/index/engine/cat/9/...post=58121
Smile

1982 - TA60 Carina 4dr sedan - fun cruiser
1983 - AE86 Sprinter Trueno - import project
2013 - Honda Civic sport - daily driver
2004 - AEU86 dot ORG - daily domain

Support our forum, buy from the AEU86 shop:
[Image: AEU86 AE86 - 4age 20v and 16v engine mounts the same?]
Visit this user's website Find all posts by this user
05-09-2007, 01:32 PM
Post: #3
4age 20v and 16v engine mounts the same?
Also read this:

http://www.club4ag.com/faq%20and%20tech_...%2020V.htm

Smile

Greetz,

Bastiaan "mux213" Olij

Moved down under, no more hachi Sad
Find all posts by this user
05-10-2007, 11:59 PM
Post: #4
4age 20v and 16v engine mounts the same?
Well I have expereince for I've already installed a 20V block into my AE86 and the regular mounts will bolt up... BUT the cast iron AE86 transmission support brace on the driver side will NOT fit the 20V block! The block is cast ever so differently that the brace will snap when installation is attempted. The passenger cast iron brace fits... so you must decide if you want a driverside brace of not... and if you do, you will have to fabricate the support brace

Dan -

You can |Sad .... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Question about 4AG 20v Engine Block CHACAMAN 1 1,243 06-10-2022 05:17 PM
Last Post: oldeskewltoy
  Cusco Powerball Headers on a NA 4AGE 16V? JDMitch 11 18,886 05-01-2021 10:09 PM
Last Post: Ivan141
  4AGE 16V engine overheat when at high speed chenfon 32 17,991 12-31-2020 06:39 AM
Last Post: chenfon
  4age 16v running roughly - diagnostics shows unknown code Ryo 8 5,898 11-09-2020 10:51 AM
Last Post: totta Crolla
  AE86 4A-GE 16v engine harness rebuild FanIsHere 7 8,527 01-17-2020 08:04 PM
Last Post: Project D

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication