16V vs BEAMS
10-25-2016, 02:04 PM
Post: #21
16V vs BEAMS
(09-28-2016 05:01 PM)Bean Wrote:  What is visible, as mentioned before it only starts kicking at 6k rpm and tapers off after 8k. The Beams makes around 140ftlbs at 3.5k and over 155ftlbs from 4.5 to about 7.2k.

You are comparing Beams figures measured on an engine dyno without ancilleries to an F20C measured on a dynojet with full ancilleries + driveline + tire losses. Aka apples to oranges. Dynojet vs dynojet would provide a clearer picture.

For high rpm big cammed engines like this, imho torque is irrelevant. Why buy one of them in the first place? The only comparison that counts is average hp in the power band, so 7000-9000rpm for the F20C.

A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user
10-25-2016, 06:08 PM
Post: #22
16V vs BEAMS
Well it's hard to find proper figures.

AE86 ex-daily
Visit this user's website Find all posts by this user
10-25-2016, 09:23 PM
Post: #23
16V vs BEAMS
any 1/4 mile times for each in AE86s?

Dan -

You can |Sad .... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Purple beams hachi in NL banpei 2 6,693 05-10-2011 11:34 PM
Last Post: Aram

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication